8
8.11
9924874 R02 - 2014 RZR XP / XP 4 1000 Service Manual
© Copyright 2013 Polaris Industries Inc.
23. Install the four rear radius rods to the bearing carriers
on each side. Use new retaining fasteners (Item 12).
Torque to specification.
24. Install the stabilizer bar link mounting bolts and new
nuts (Item 13). Torque to specification.
25. Install rear wheels and wheel nuts. Torque to
specification.
Rear Shock Lower Bolt:
70 ft-lbs (95 Nm)
Outer Radius Rod Bolts:
40 ft-lb (54 Nm)
Stabilizer Bar Linkage:
40 ft-lbs (54 Nm)
Wheel Nuts:
120 ft-lbs (163 Nm)
26. Properly lower the vehicle.
27. Install the air box assembly as outlined in the EFI
Chapter (see Chapter 4 “ECT Sensor
Replacement”).
28. Install the rear bumper and cargo box as an
assembly (see Chapter 5).
29. Connect the (-) negative battery cable.
30. Install the engine service panel, console cover and
seats.
31. If transmission lubricant was drained, fill the
transmission with the specified amount of Polaris
AGL (see Chapter 2 “Transmission Lubrication”).
Recommended Transmission Lubricant:
AGL (PN 2878068) (Quart)
Capacity (Standard): 44 oz. (1300 ml)
Capacity (INT’L): 41 oz. (1200 ml)
TRANSMISSION
To Next Page
Loading...
Need help?
General
