Quantum Scalar i6000 User Manual

Chapter 15: Maintaining Your Library
Monitoring the Library
538 Quantum Scalar i6000 User’s Guide
Tab l e 45 on page 538 describes the elements on the Tem p e r a t u r e
tab.
Table 45 Temperature tab
2 To view current information, click Refresh.
Displaying Voltage Information
1 To display voltage status information for various library
components, click the Voltage tab on the Sensor Status dialog box.
Element Description
Name The name of the temperature sensor.
Status The temperature status in the vicinity of the sensor. If the temperature is
within normal operational limits, the status is nominal. Otherwise, a warning
or alarm is indicated.
Celsius The sensor’s temperature reading in degrees Celsius.
Location The location of the temperature sensor within the library. Control
management blade (CMB) locations are indicated by means of a coordinate
system. For information about location coordinates, see
Understanding
Location Coordinates on page 459.

Quantum Scalar i6000 Specifications

General

Form Factor	Rack-mountable
Interface	Fibre Channel, SAS
Product Type	Tape Library
Cooling	Redundant cooling fans
Dimensions	Varies by configuration
Weight	Varies by configuration
Operating Humidity	20% to 80% non-condensing
Scalability	Scalable
Drive Types	LTO
Redundancy	Redundant power supplies
Management	Web-based management
Tape Technology	LTO
Supported Media	LTO Ultrium 9, LTO Ultrium 8, LTO Ultrium 7, LTO Ultrium 6
Power Supply	Redundant power supplies
Non-operating Humidity	5% to 95% non-condensing