To Next Page

To Previous Page

SM i D366

ARDF DF3030 D366

TABLE OF CONTENTS

1. REPLACEMENT AND ADJUSTMENT............................................1

1.1 COVERS AND TRAY.................................................................................... 1

1.1.1 REAR COVER ..................................................................................... 1

1.1.2 FRONT COVER AND ORIGINAL TRAY.............................................. 1

1.2 DOCUMENT FEED COMPONENTS ............................................................ 2

1.2.1 ORIGINAL FEED UNIT........................................................................ 2

1.2.2 PICK-UP ROLLER............................................................................... 2

1.2.3 FEED BELT ......................................................................................... 3

1.2.4 SEPARATION ROLLER....................................................................... 4

1.3 ELECTRICAL COMPONENTS ..................................................................... 5

1.3.1 ARDF DRIVE BOARD AND DF POSITION SENSOR......................... 5

1.3.2 ORIGINAL LENGTH SENSORS AND TRAILING EDGE SENSOR..... 5

1.3.3 ORIGINAL SET SENSOR.................................................................... 6

1.3.4 ORIGINAL SIZE SENSORS AND SKEW CORRECTION SENSOR ... 6

1.3.5 STAMP SOLENOID AND ORIGINAL EXIT SENSOR ......................... 7

1.4 ORIGINAL FEED DRIVE .............................................................................. 8

1.4.1 FEED MOTOR..................................................................................... 8

1.4.2 PICK-UP SOLENOID........................................................................... 8

1.4.3 INVERTER SOLENOID ....................................................................... 9

1.4.4 FEED CLUTCH.................................................................................. 10

1.4.5 TRANSPORT MOTOR....................................................................... 11

2. DETAILED DESCRIPTIONS..........................................................12

2.1 COMPONENT LAYOUT ............................................................................. 12

2.1.1 MECHANICAL COMPONENT LAYOUT............................................ 12

2.1.2 ELECTRICAL COMPONENT LAYOUT ............................................. 13

2.1.3 DRIVE LAYOUT................................................................................. 16

2.2 BASIC OPERATION ................................................................................... 17

2.2.1 ORIGINAL SET AND SIZE DETECTION........................................... 17

2.2.2 MIXED ORIGINAL SIZE MODE......................................................... 18

2.2.3 PICK-UP AND SEPARATION............................................................ 20

Ricoh D037 User Manual

Questions and Answers: