Mainframe Installation
26
No. Description Remark Q’ty
EU AA CHN
panel
4 Decal – Paper Tray 1 1 1
5 CE Marking Traceability Information For EU only 1 - -
6 Power Supply Cord 1 1 1
7
CD-ROM (Printer and Scanner Drivers) 1 1 -
CD-ROM (Operating Instructions) - 1 -
CD-ROM (Printer and Scanner Drivers/ Operating
Instructions)
- - 1
8 Safety Information For EU only 1 - -
9 Notes for Using This Machine Safely 1 1 1
10 Note to Users in EU Countries 1 - -
11 Notes to Users (NFC Tag Leaflet) Regarding the installation of the
NFC tag.
1 1 1
12 Software License Agreement 1 1 1
- Notes For Users For printing with AirPrint - 1 1
- For Users of This Product Before using the wireless function - 1 -
- Sheet - TEL - - 1
- Manual: Read This First - 1 1
- Manual: Start Guide - 1 -
• An NFC tag is required for connecting this machine to an Android smart device that has the Ricoh
Smart Device Connector application installed. Give this NFC tag to the customer so that they can
attach it to the machine. Where the tag should be attached and how to set it up for using the
smart-device application are described in the help guide within the application. The setup procedure
should be performed by the customer.
Installation Procedure
Put the machine on the optional paper tray unit first if you install an optional paper feed unit at the same time.
Then install the machine and other options.
• Keep the shipping retainers after you install the machine. You may need them in the future if you
transport the machine to another location.
To Next Page
Loading...
Need help?
General
