Dry-delay (Dup)
To prevent spoiling of duplex-printed copies, select a print delivery interval to allow them to dry.
The interval must be long enough to allow a duplex-printed sheet to dry. You can specify an
interval between 1 and 20 seconds.
Default: [Off]
Paper Feed Test
You can eject a sheet of paper without printing anything on it.
De-condensation
To remove moisture from inside the machine, you can eject three sheets of paper without printing
anything on them.
Nozzle Check
Follow the procedure below to check whether the print head nozzles are clogged up or not by printing
a nozzle check test pattern.
1. Press the [ /Menu] key.
2. Press the [ ] or [ /Menu] key to display [Maintenance], and then press the [#Enter] key.
Menu:
Maintenance
3. Press the [ ] or [ /Menu] key to display [Nozzle Check], and then press the [#Enter]
key.
Maintenance:
Nozzle Check
4. Press the [#Enter] key.
Press # to
print pattern
A test pattern is printed.
5. Press the [Escape] key.
6. Check the printed test pattern.
Printed Test Pattern
To Next Page
Loading...
Need help?
General