Cleaning
Clean the outside of the machine regularly to maintain the condition of the machine.
• Do not remove any covers or screws other than those explicitly mentioned in this manual. Inside
this machine are high voltage components that are an electric shock hazard. Contact your sales
or service representative if any of the machine's internal components require maintenance,
adjustment, or repair.
• Do not attempt to disassemble or modify this machine. Doing so risks burns and electric shock.
• When performing maintenance on the machine, always disconnect the power cord from the
wall outlet.
To clean the exterior of the machine, wipe it with a soft, dry or damp cloth. If the dirt does not come off,
wipe the machine first with a cloth moistened with a neutral detergent, then with a damp cloth, and
finally with a dry cloth.
• Do not use volatile chemicals like benzene or thinner, or insecticides on the machine. Using these
chemicals could deform, crack, or change the color of the machine.
• When wiping the machine with a cloth moistened with detergent, be sure to wipe only the exterior.
Cleaning the Power Cable Plug
This section describes precautions for cleaning the power cable plug.
• Be sure to disconnect the plug from the wall outlet at least once a year and check for the
following:
• There are burn marks on the plug.
• The prongs on the plug are deformed.
• If any of the above conditions exist, do not use the plug and consult your dealer or service
representative. Use of the plug could result in fire or electric shock.
Cleaning
205
To Next Page
Loading...
Need help?
General