Installing the Printer Drivers for a USB
Connection
This section explains how to install only the printer driver when the machine is connected to a computer
via USB.
If you installed the printer driver by performing Quick Install for USB, there is no need to install it again
here.
• Only administrators can perform this installation. Log on as a member of the Administrators group.
SG 3110DN/SG 3110DNw/SG 7100DN
1. Press the [Power] key.
2. Insert the CD-ROM in the CD-ROM drive.
Quit all other applications currently running.
If the "Add New Hardware Wizard" dialog box appears, follow the displayed instructions to install
USB Printing Support.
When you insert the CD-ROM, the installer launches. Auto Run might not work automatically with
certain OS settings. If this is the case, double-click "SETUP.EXE", located on the CD-ROM root
directory, or click [Run SETUP.EXE] in the [AutoPlay] dialog box.
If the screen does not appear even when you double-click the [SETUP.EXE] icon, or if an error
occurs during the installation, access the CD-ROM drive from [My Computer] or [Explorer].
Double-click the [RP_SETUPXX.EXE] icon, and then install the printer driver by following the
instructions that appear on the screen.
3. Select a language for the interface, and then click [OK].
4. Click [PCL/RPCS Raster Printer Drivers] or [Printer Driver].
5. Read the entire license agreement carefully. If you accept its terms, click [I accept the
agreement.], and then click [Next >].
6. Select the program you want to use, and then click [Next >]. (SG 3110DN/SG
3110DNw)
7. Select the model of printer you want to use.
8. Click [+] to display the printer settings.
9. Click [Port:], and then click [USBXXX].
10. If necessary, configure the default printer.
11. If necessary, configure the setting for sharing the printer.
Installing the Printer Drivers for a USB Connection
69
To Next Page
Loading...
Need help?
General