Model-Specific Information
This section explains how you can identify the region your machine belongs to.
There is a label on the rear of the machine, located in the position shown below. The label contains
details that identify the region your machine belongs to. Read the label.
The following information is region-specific. Read the information under the symbol that corresponds to
the region of your machine.
(mainly Europe and Asia)
If the label contains the following, your machine is a region A model:
• CODE XXXX -22, -27
• 220-240 V
(mainly North America)
If the label contains the following, your machine is a region B model:
• CODE XXXX -17
• 100-120 V
• Dimensions in this manual are given in two units of measure: metric and inch. If your machine is a
Region A model, refer to the metric units. If your machine is a Region B model, refer to the inch
units.
Available Units and Options for Each Model
The available units and options differ depending on the model.
Unit/Option SG 2100N SG 3110DN SG 3110DNw SG 7100DN
Paper Feed Unit Not Available Optional Optional Optional
15
To Next Page
Loading...
Need help?
General