If it is difficult to remove the jammed paper, detach the multi bypass tray so that the paper can be
removed.
1. Detach the multi bypass tray.
See page 30 "Attaching and Detaching the Multi Bypass Tray".
2. Remove the jammed paper from the rear of the machine.
3. Reattach the multi bypass tray.
See page 30 "Attaching and Detaching the Multi Bypass Tray".
4. Load paper in the bypass tray with the side to be printed on facing up and without
exceeding the sheet limit.
• Continue to remove the jammed paper according to subsequent error messages until the messages
no longer appear. See page 224 "Paper Jam".
• If paper jams occur repeatedly, see page 222 "Paper Is Not Fed or Delivered Normally".
Removing Paper Jammed under the Top Cover
• Do not touch the feed belt, ink tubes, paper pressing board, or toothed rubber belt. Also, take care
not to catch cables or ink tubes with your sleeves.
Paper Jam
229
To Next Page
Loading...
Need help?
General