Ricoh SG K3100DN User Manual

2. In the address bar, enter "http://(machine's IP address or host name)/".
3. Click [Administrator Login].
A dialog box for entering the user name and password opens.
4. Enter the user name and password, and then click [OK].
If this is the first time to do this, enter "admin" as the user name and leave the password blank.
To ensure security, it is important you change the password.
5. In the menu area, click [Settings].
6. Specify the machine settings.
7. Click [OK].
The specified settings are transmitted to the machine.
Changing the Machine Settings
You can specify the following settings on each page of Web Image Monitor.
[Device Settings] area
• [System] page
You can specify [Device Name], [Comment], [Location], and [Recycle Paper Mode].
• [Date/Time] page
You can specify [Set Date], [Set Time], [SNTP Server Address], [SNTP Polling Interval], [Time
Zone], and [Daylight saving time settings].
• [Email] page
For details about the items and descriptions, see page 169 "Notifying the Machine Status by
E-mail".
• [ROM Update] page
You can check the ROM firmware version and update the firmware as necessary. Download
the latest update from the manufacturer's website and update the firmware according to the
displayed instructions.
[Auto Email Notification] area
See page 169 "Notifying the Machine Status by E-mail".
[Administrator Tools] area
• [Administrator Authentication] page
You can specify [New Password] and [Confirm New Password].
• [Restore Defaults] page
You can restore the default settings for the network interface.
Using Web Image Monitor
165

Ricoh SG K3100DN Specifications

General

Brand	Ricoh
Model	SG K3100DN
Category	Printer
Language	English