Ruijie Reyee RG-EG Series User Manual

Web-based Configuration Guide 1 Network Settings
36
(2) Set the port paramters and click OK.
3.2.2 Viewing the Port Information
Choose Local Device > Overview > Network > Port Settings > Port Info.
3.3 Configuring the WAN Ports
Choose Local Device > Basics > WAN.
You can configure multi-line access for the device to allow multiple lines to work simultaneously. After you switch
to multi-line access, you need to specify the egress provider of the lines and set the load balancing mode, in
addition to setting basic network parameters for the WAN ports.
Caution
The number of lines supported varies with the product. The actual configuration prevails.
3.3.1 Configuring the Internet Access Mode
Choose Local Device > Basics > WAN > Single Line/Dual-Line/Three Lines/Four Lines.
The device can access the WAN in one of the following three methods: static IP, DHCP, and PPPoE dialing. Select
a proper method based on the actual broadband line type. For details, see Section 1.5 Configuration Wizard
(Router Mode).

Ruijie Reyee RG-EG Series Specifications

General

Brand	Ruijie
Model	Reyee RG-EG Series
Category	Network Router
Language	English