Web-based Configuration Guide 1 Network Settings
87
3. Enabling the Ping Prohibition Function
Choose Local Device > Security > Local Protection > Local Safety.
The ping prohibition function includes the following:
If you select Prohibit LAN, ping packets sent from all clients on the LAN to the device will be discarded.
If you select Prohibit WAN, ping packets sent from all clients on the WANs to the device will be discarded.
Ping packets sent from a client to the device will be responded only after the IP address of the client is
contained in Admin IP Address list. For the configuration of admin IP addresses, see Configuring an Admin
IP Address.
4. Disabling Intranet Access to Eweb
Choose Local Device > Security > Local Protection > Local Safety.