Web-based Configuration Guide 1 Network Settings
53
Table 3-6 IPv6 address configuration for LAN port
Specify the interface from which the prefix is obtained, such as WAN_V6 or
WAN1_V6. By default, the device obtains prefixes from all interfaces.
Specify the length of the subnet prefix. The value is in the range of 48 to 64.
Configure the subnet ID in the hexadecimal format. The value 0 indicates
auto increment.
Set the lease of the IPv6 address, in minutes.
Configure the IPv6 DNS server address.
3.7.7 Viewing the DHCPv6 Client
Choose Local Device > Basics > IPv6 Address > DHCPv6 Clients.
When the device functions as a DHCPv6 server to allocate IPv6 addresses to clients, you can view the information
about the client that obtains an IPv6 address from the device on the current page. The client information includes
the host name, IPv6 address, remaining lease time, and DHCPv6 Unique Identifier (DUID).
Enter the DUID in the search bar and click to quickly find relative information of the specified DHCPv6
client.
3.8 Configuring a DHCP Server
3.8.1 DHCP Server Overview
After the DHCP server function is enabled in the LAN, the device can automatically deliver IP addresses to clients,
so that clients connected to the LAN ports of the device or connected to Wi-Fi can access the Internet using the
obtained addresses.
To Next Page
Loading...
Need help?
General
