Engineering and remote access
3.8 OPC UA server
SITOP UPS1600 / UPS1100
158 Manual, 04.2017, A5E37775406-8-76
3. In the editor area, click on "Browse", and in the file dialog, select the path where the
configuration file should be saved.
4. Click on the "OK" button to load the configuration.
OPC UA (Open Platform Communications - Unified Architecture) for non-proprietary
communication in automation systems.
You can find information in the Internet at opcfoundation.org
(https://opcfoundation.org/about/opc-technologies/opc-ua/
).
Note
Example of an installation
Using "UaExpert" as example, this sec
tion describes how, using a client, you access
UPS1600 data.
● UaExpert V1.4.4 is installed.
The OPC UA client for Microsoft Windows can be downloaded from the Internet site of
Unified Automation:
https://www.unified-automation.com/downloads/opc-ua-clients.html (
https://www.unified-
automation.com/downloads/opc-ua-clients.html)
● Main module SITOP UPS1600 operates with firmware version v2.2.0 or higher.
● The IP address of SITOP UPS1600 is configured.
● The OPC UA server of the SITOP UPS1600 is activated.
UA, every device is assigned a profile, which describes the capability of the
UA server of the SITOP UPS1600 corresponds to the "Micro Embedded Device
To Next Page
Loading...
Need help?
General
