Note
Tool measurement is only possible with an active tool.
4.5.4 Measuring drilling and milling tools with fixed reference point
Procedure
1. Insert the tool you want to measure in the spindle.
2. Select "JOG" mode in the "Machine" operating area.
...
3. Press the "Meas. tool" and "Length manual" softkeys.
The "Length Manual" window opens.
4. Press the "Tool" softkey to open the tool list, select the desired tool and
press the "In Manual" softkey.
You return to the "Length Manual" window.
5. Select the cutting edge number D and the number of the replacement
tool ST of the tool.
6. Select the "fixed point" reference point.
7. If you are measuring with a test socket, enter 0 for offset value "DZ" and
approach the fixed point in the Z direction.
Approaching is performed with a rotating spindle in the opposite direction
of rotation. The test socket automatically indicates when the precise po‐
sition is reached.
- OR -
Setting up the machine
4.5 Measure tool
Milling
102 Operating Manual, 08/2018, 6FC5398-7CP41-0BA0
To Next Page
Loading...
Need help?
General
