6.11.3.8 Accepting contours
Calling up the cycle
1. The part program or ShopMill program to be processed has been created
and you are in the editor.
2. Press the "Mill contour" softkey.
3. Press the "New contour" softkey.
Select contour
The start and end point are specified for the contour line.
The start point and the direction are selected on a selected element. Beginning at the start
point, the automatic contour line takes all subsequent elements of a contour. The contour line
ends as soon as there are no subsequent elements – or intersections with other elements of
the contour occur.
Note
If a contour includes more elements than can be processed, you will be offered the option of
transferring the contour to the program as pure G code.
This contour then can no longer be edited in the editor.
With the "Undo" softkey, you can undo your contour selection back to a
specific point.
Procedure
Opening a DXF file
1. Enter the desired name in the "New Contour" window.
2. Press the "From DXF file" and "Accept" softkeys.
The "Open DXF File" window opens.
3. Select a storage location and place the cursor on the relevant DXF file.
You can, for example, use the search function to search directly for a DXF
file in comprehensive folders and directories.
4. Press the "OK" softkey.
The CAD drawing opens and can be edited for contour selection.
The cursor takes the form of a cross.
Machining the workpiece
6.11 Working with DXF files
Milling
236 Operating Manual, 08/2018, 6FC5398-7CP41-0BA0
To Next Page
Loading...
Need help?
General
