Siemens SINUMERIK 840DE SL User Manual

Parameter Description Unit
Selection Coordinate system (only available for axis selection XY)
● Right-angled
● Polar
mm
Z0 Z coordinate of the reference point (abs) mm
XP
YP
L0
C0
L1 ... L7
C1 ... C7
Axes: XY / coordinate system – polar
X coordinate of the reference point – pole (abs)
Y coordinate of the reference point – pole (abs)
Length (abs) – distance of the 1st Position from the pole
Angle (abs) – Angle of the 1st position referred to the reference axis
Lengths of additional positions (abs or inc)
Angles of additional positions (abs or inc)
mm
mm
mm
Degrees
mm
Degrees
(only for ShopMill)
X0
Y0
X1 ... X8
Y1 ... Y8
Axes: XY / coordinate system – right angled
X coordinate of the 1st position (abs)
Y coordinate of the 1st position (abs)
X coordinate for further positions (abs. or inc.)
Y coordinate for further positions (abs. or inc.)
mm
mm
mm
mm
(only for G code)
X0
Y0
X1 ... X8
Y1 ... Y8
(only "right angled")
X coordinate of the 1st position (abs)
Y coordinate of the 1st position (abs)
X coordinate of additional positions (abs or inc)
Y coordinate of additional positions (abs or inc)
mm
mm
mm
mm
X0
A0
X1 ... X8
A1 ... A8
Axes: XA
X coordinate of the 1st position (abs)
A coordinate (angle) of the 1st position (abs)
X coordinates of additional positions (abs or inc)
A coordinates (angle) of additional positions (abs or inc)
mm
Degrees
mm
mm
X0
Y0
A0
X1 ... X5
Y1 ... Y5
A1 ... A5
Axes: XYA
X coordinate of the 1st position (abs)
Y coordinate of the 1st position (abs)
A coordinate (angle) of the 1st position (abs)
X coordinates of additional positions (abs or inc)
Y coordinates of additional positions (abs or inc)
A coordinates (angle) of additional positions (abs or inc)
mm
mm
Degrees
mm
mm
Degrees
10.1.12 Row position pattern (HOLES1)
Function
You can program any number of positions at equal distances along a line using the "Row
position pattern" function.
Programming technological functions (cycles)
10.1 Drilling
Milling
Operating Manual, 08/2018, 6FC5398-7CP41-0BA0 411

Siemens SINUMERIK 840DE SL Specifications

General

Brand	Siemens
Model	SINUMERIK 840DE SL
Category	Control Systems
Language	English