6.11 Working with DXF files
6.11.1 Overview
The "DXF-Reader" function allows you to open files created in SINUMERIK Operate directly
in a CAD system and accept and store contours as well as drilling positions directly in G-code
and ShopMill programs.
Software option
You require the "DXF-Reader" software option in order to use this function.
Machine manufacturer
Please refer to the machine manufacturer's specifications.
6.11.2 Displaying CAD drawings
6.11.2.1 Open a DXF file
Procedure
1. Select the "Program Manager" operating area.
2. Choose the desired storage location and position the cursor on the DFX
file that you want to display.
3. Press the "Open" softkey.
The selected CAD drawing will be displayed with all its layers, i.e. with all
graphic levels.
4. Press the "Close" softkey to close the CAD drawing and to return to the
Program Manager.
6.11.2.2 Cleaning a DXF file
All contained layers are shown when a DXF file is opened.
Layers that do not contain any contour- or position-relevant data can be shown or hidden.
Requirement
The DXF file is open in the Program Manager or in the editor.
Machining the workpiece
6.11 Working with DXF files
Milling
226 Operating Manual, 08/2018, 6FC5398-7CP41-0BA0
To Next Page
Loading...
Need help?
General
