6. Select the axis to be traversed on the machine control panel.
...
7. Press the <+> or <-> key on the machine control panel.
... - OR -
Select the direction with the aid of the cross-switching lever.
The axes are moved at the set machining feedrate.
Note:
Please refer to the machine manufacturer's specifications.
The active direction is graphically displayed in the basic screen by means
of the wind rose.
16.6.2 Angular milling
The basic effective direction can be selected via the axis direction keys or via the cross-
switching lever. In addition, an angle (α1) can also be entered.
Procedure
1. "Manual Machine" is active.
2. Press the "Angular milling" softkey.
3. Select the tool, spindle, and spindle direction and specify the machining
feedrate.
4. Enter the desired angle α1.
Note
Selecting/deselecting the angular milling and changing the angle α1 is only possible in the
reset state.
Parameter Description Unit
T Tool name
D Cutting edge number
F Feedrate mm/min
mm/rev
S / V Spindle speed or constant cutting rate rev/min
m/min
Working with Manual Machine
16.6 Simple workpiece machining
Milling
838 Operating Manual, 08/2018, 6FC5398-7CP41-0BA0
To Next Page
Loading...
Need help?
General
