13.10 Changing a tool type
Procedure
...
1. The tool list, the wear list, the OEM tool list or the magazine is opened.
2. Position the cursor in the column "Type" of the tool that you wish to
change.
3. Press the <SELECT> key.
The "Tool types - Favorites" window opens.
4. Select the desired tool type in the list of favorites or select using the soft‐
keys "Cutters 100-199", "Drill 200-299", or "Spec. tool 700-900".
5. Press the "OK" softkey.
The new tool type is accepted and the corresponding icon is displayed in
the "Type" column.
Tool management
13.10 Changing a tool type
Milling
Operating Manual, 08/2018, 6FC5398-7CP41-0BA0 727
To Next Page
Loading...
Need help?
General
