Siemens SINUMERIK 840DE SL User Manual

Procedure
1. Select the "Program manager" operating area.
2. Select the desired storage location and position the cursor on the folder
in which you would like to store the program.
3. Press the "New" softkey.
4. Press the "ShopMill" softkey.
The "New Step Sequence Program" window opens.
The "ShopMill" type is specified.
5. Enter the desired program name and press the "OK" softkey.
14.4.6 Storing any new file
In each directory or subdirectory you can create a file in any format that you specify.
Note
File extensions
In the NC memory, the extension must have 3 characters, and DIR or WPD are not permitted.
In the NC memory, you can create the following file types under a workpiece using the "Any"
softkey.
Managing programs
14.4 Creating a directory / program / job list / program list
Milling
Operating Manual, 08/2018, 6FC5398-7CP41-0BA0 761

Siemens SINUMERIK 840DE SL Specifications

General

Brand	Siemens
Model	SINUMERIK 840DE SL
Category	Control Systems
Language	English