9.16 Calling technology functions
9.16.1 Additional functions in the input screens
Selection of units
If, for example, the unit can be switched in a field, this is highlighted as soon as the cursor
is positioned on the element. In this way, the operator recognizes the dependency.
The selection symbol is also displayed in the tooltip.
Display of abs or inc
The abbreviations "abs" and "inc" for absolute and incremental values are displayed behind
the entry fields when a switchover is possible for the field.
Help screens
2D and 3D graphics or sectional views are displayed for the parameterization of the cycles.
Online help
If you wish to obtain more detailed information about certain G code commands or cycle
parameters, then you can call a context-sensitive online help.
9.16.2 Checking input parameters
When generating the program, the parameters that are entered are already checked in order
to avoid making incorrect entries.
If a parameter is assigned an illegal value, this is indicated in the input screen and is designated
as follows:
● The entry field has a colored background (background color, pink).
● A note is displayed in the comment line.
● If the parameter input field is selected using the cursor, the note is also displayed as tooltip.
The programming can only be completed after the incorrect value has been corrected.
Incorrect parameter values are also monitored with alarms during the cycle runtime.
9.16.3 Setting data for technological functions
Technological functions can be influenced and corrected using machine or setting data.
For additional information, please refer to the following documentation:
Creating a ShopMill program
9.16 Calling technology functions
Milling
350 Operating Manual, 08/2018, 6FC5398-7CP41-0BA0
To Next Page
Loading...
Need help?
General
