Siemens SINUMERIK 840DE SL User Manual

12.1 Activate collision avoidance
Precondition
● Collision avoidance is setup and an active machine model is available.
● The setting "Collision avoidance" has been selected for the AUTO operating mode or for
the JOG and MDA operating modes.
Procedure
1. Select the "Machine" operating area.
2. Press the <AUTO> key.
3. Press the "Sim. rec." softkey.
4. Press the "Other views" and "Machine space" softkeys.
During simultaneous recording, an active machine model is displayed.
Collision avoidance
12.1 Activate collision avoidance
Milling
Operating Manual, 08/2018, 6FC5398-7CP41-0BA0 681

Siemens SINUMERIK 840DE SL Specifications

General

Brand	Siemens
Model	SINUMERIK 840DE SL
Category	Control Systems
Language	English