15.4 Sorting, alarms, faults and messages
If a large number of alarms, messages or alarm logs are displayed, you have the option of
sorting these in an ascending or descending order according to the following criteria:
● Date (alarm list, messages, alarm log)
● Number (alarm list, messages)
As a consequence, for every extensive lists, you can obtain the required information faster.
Procedure
1. Select the "Diagnostics" operating area.
...
2. Press the softkey "Alarm list", "Messages" or "Alarm log" to display the
requested messages and alarms.
3. Press the "Sort" softkey.
The list of entries is sorted in descending (decreasing) order according
to date, i.e. the most recent information is at the beginning of the list.
4. Press the softkey "Ascending" to sort the list in the ascending order.
The most recent event is shown at the end of the list.
5. Press the "Number" softkey if you wish to sort the alarm list or the list with
messages according to numbers.
6. Press the "Decreasing" softkey if you wish to display the list in a decreas‐
ing/descending order.
Alarm, error, and system messages
15.4 Sorting, alarms, faults and messages
Milling
814 Operating Manual, 08/2018, 6FC5398-7CP41-0BA0
To Next Page
Loading...
Need help?
General
