Procedure
1. The part program to be executed has been created and you are in the
editor.
2. Press the "Various" softkey.
3. Press the "Swivel tool" and "Setting milling tool" softkeys.
The "Setting tool" input window opens.
Parameter Description Unit
PL Plane for milling
TC Name of the swivel data record
Retraction No No retraction before swiveling
Incremental retraction in tool direction
The retraction path is entered into parameter ZR.
Maximum retraction in tool direction
Retraction in the direction of machine axis Z
Retract towards the machine axis Z and then in the direction X, Y
ZR Retraction path - (only for incremental retraction in the tool direction)
Axis sequence Sequence of the axes which are rotated around
XY or XZ or YX or YZ or ZX or ZY
X Rotation around X Degrees
Y Rotation around Y Degrees
Tool Tool tip position when swiveling
Tracking
The position of the tool tip is maintained during swiveling.
No tracking
The position of the tool tip changes during swiveling.
10.6.3 Aligning turning tools (CYCLE800) - millling/turning machine
Function
The purpose of the "Align turning tool" function is to support combined milling-turning
machines, i.e. milling machines which have been expanded to include turning functionality.
Tool orientation in the turning mode is implemented using a swivel axis (e.g. B1) with an
associated milling spindle (e.g. SP1).
Programming technological functions (cycles)
10.6 Further cycles and functions
Milling
642 Operating Manual, 08/2018, 6FC5398-7CP41-0BA0
To Next Page
Loading...
Need help?
General
