Siemens SINUMERIK 840DE SL User Manual

- OR -
4. Press the "Details" and "Zoom elem. selection" softkeys if you want to
automatically zoom elements that are in a selection set.
6.11.2.4 Changing the section
If you want to move or change the size of a section of the drawing, for example, to view details
or redisplay the complete drawing later, use the magnifying glass.
You can use the magnifying glass to determine the section and then change its size.
Requirement
The DXF file is opened in the Program Manager or in the editor.
Procedure
1. Press the "Details" and "Magnifying glass" softkeys.
A magnifying glass in the shape of a rectangular frame appears.
2. Press the <+> key to enlarge the frame.
- OR -
Press the <-> key to reduce the frame.
- OR -
Press a cursor key to move the frame up, down, left or right.
3. Press the "OK" softkey to accept the section.
6.11.2.5 Rotating the view
You can change the orientation of the drawing.
Requirement
The DXF file is open in the Program Manager or in the editor.
Machining the workpiece
6.11 Working with DXF files
Milling
228 Operating Manual, 08/2018, 6FC5398-7CP41-0BA0

Siemens SINUMERIK 840DE SL Specifications

General

Brand	Siemens
Model	SINUMERIK 840DE SL
Category	Control Systems
Language	English