Siemens SINUMERIK 840DE SL User Manual

Parameter Meaning
Magazine location The magazine number is specified first, followed by the location number in the magazine.
If there is only one magazine, only the location number is displayed.
Tool name The tool is identified by the name and the sister tool number. You can enter the name as text or
number.
ST Sister tool number (for sister tool strategy)
D quantity Number of created cutting edges
D Cutting edge number
Tool state A Activate tool
F Tool enabled
G Block tool
M Measure tool
V Reaching the prewarning limit
W Tool being changed
P Tool in fixed location
The tool is permanently assigned to this magazine location
I Tool has been in use
Tool size Standard Tool does not require an additional location in a magazine.
Oversize The tool occupies two half locations left, two half locations right, one half
location top and one half location bottom in a magazine.
Special size
Left Number of half locations to the left of the tool
Right Number of half locations to the right of the tool
Tool OEM parameters
1 - 6
Freely available pa‐
rameters
13.9.3 Cutting edge data
The "Tool Details" window provides the following data on the selected tool when the "Cutting
edge data" softkey is active.
Parameter Meaning
Magazine location The magazine number is specified first, followed by the location num‐
ber in the magazine.
If there is only one magazine, only the location number is displayed.
Tool name The tool is identified by the name and the sister tool number. You
can enter the name as text or number.
ST Sister tool number (for sister tool strategy)
D quantity Number of created cutting edges
D Cutting edge number
Tool type Tool symbol with type number
Tool management
13.9 Tool details
Milling
724 Operating Manual, 08/2018, 6FC5398-7CP41-0BA0

Siemens SINUMERIK 840DE SL Specifications

General

Brand	Siemens
Model	SINUMERIK 840DE SL
Category	Control Systems
Language	English