Siemens SINUMERIK 840DE SL User Manual

7. Continue programming up to the point where you want to repeat the pro‐
gram blocks.
8. Press the "Various" and "Repeat progr." softkeys.
9. Enter the names of the start and end markers and the number of times
the blocks are to be repeated.
10. Press the "Accept" softkey.
The marked program blocks are repeated.
Creating a ShopMill program
9.11 Repeating program blocks
Milling
340 Operating Manual, 08/2018, 6FC5398-7CP41-0BA0

Siemens SINUMERIK 840DE SL Specifications

General

Brand	Siemens
Model	SINUMERIK 840DE SL
Category	Control Systems
Language	English