Siemens SINUMERIK Commissioning Manual

Tool management
6.4 Job processing of tools
HMI Advanced (IM4)
246 Commissioning Manual, 03/2009, 6FC5397-0DP10-3BA0
Tool status bits
You can set which tool status bits are to be displayed in the results list. Language-specific
letters can also be specified in bits for header and list lines.
Example:
Paramtm.ini, [BatchTools]:
ResultToolStatusColumnsEnable= 1111100100110000
1: display, 0: do not display. Bit 1 to 16,
bit 1 is the least-significant bit in the tool status and is positioned to the left in this character
sequence
ResultToolStatusColumnsHeaderText=<Empty>
Text in the header for the tool status column, language-specific
ResultToolStatusColumnsListText=<Empty>
Text in the data for the tool status column, language-specific
ToolStatusColHeaderText="123456789ABCDEFG"
Header; Bits 1 to 16, bit 1 is the least-significant bit in the tool status and is positioned to the
left in this character string.
ToolStatusColListText="123456789ABCDEFG"
Data; Bits 1 to 16, bit 1 is the least-significant bit in the tool status and is positioned to the left
in this character string.
User authorizations
You can set the user rights for the softkeys involved in the paramtm.ini file, [ACCESSLEVEL]
section, entries "SKB...").
Example:
[ACCESSLEVEL]
SKBATCH=7; Softkey filter lists
SKFILTER1=7; Softkey Filter1
SKFILTER2=7; Softkey Filter2
SKFILTER3=7; Softkey Filter3
SKFILTER4=7; Softkey Filter4
SKFILTER5=7; Softkey Filter5
SKFILTER6=7; Softkey Filter6
SKBMAGFILTER=7; Softkey magazine selection
SKBATREACT=7; Softkey batch function "Reactivate"
SKBATTOCABIN=7; Softkey batch function "In cabinet"
SKBATDELTOOL=7; Softkey batch function "Delete"
SKBATUNLOAD=7; Softkey batch function "Unload"
SKBFILTERACT=7; Softkey batch function "Update"

Siemens SINUMERIK Specifications

General

Brand	Siemens
Model	SINUMERIK
Category	Control Unit
Language	English