Sony MLS-X1 - Page 277

277
Locking a register
1 Open the effect timeline register display menu.
To lock a multi region register
Open the Home > Register > Effect Timeline > Edit
R
egister > Browse Multi Rgn menu (18301.31).
To lock a single region register
Open the Home > Register > Effect Timeline > Edit
R
egister > Browse Single Rgn menu (18301.32).
2 Select the target region to set.
For details about selecting multiple regions, see “To
select a region” (page 274).
For details about selecting a single region, see “To
select a region” (page 275).
3 In the list on the left, select the target register to lock.
To select and lock multiple registers, place a check
m
ark beside the target registers to lock.
To select and lock all registers, place a check mark in
t
he Select All checkbox.
You can also press the [Select Register(s)] button and
en
ter a register number in the numeric keypad
window.
4 Press the [Lock] button.
To release the lock
Select the target register to unlock and press the [Unlock]
bu
tton.
Deleting a register
A locked register cannot be deleted.
1 Open the effect timeline register display menu.
To delete a multi region register
Open the Home > Register > Effect Timeline > Edit
R
egister > Browse Multi Rgn menu (18301.31).
To delete a single region register
Open the Home > Register > Effect Timeline > Edit
R
egister > Browse Single Rgn menu (18301.32).
2 Select the target region to set.
For details about selecting multiple regions, see “To
select a region” (page 274).
For details about selecting a single region, see “To
select a region” (page 275).
3 In the list on the left, select the target register to
delete.
To select and delete multiple registers, place a check
m
ark beside the target registers to delete.
To select and delete all registers, place a check mark
i
n the Select All checkbox.
You can also press the [Select Register(s)] button and
ent
er a register number in the numeric keypad
window.
4 Press the [Delete] button.
5 Check the message, then press [OK].
Renaming a register
A locked register cannot be renamed.
1 Open the effect timeline register display menu.
To rename a multi region register
Open the Home > Register > Effect Timeline > Edit
R
egister > Browse Multi Rgn menu (18301.31).
To rename a single region register
Open the Home > Register > Effect Timeline > Edit
R
egister > Browse Single Rgn menu (18301.32).
2 Select the target region to set.
For details about selecting multiple regions, see “To
select a region” (page 274).
For details about selecting a single region, see “To
select a region” (page 275).
3 In the list on the left, select the target register to
rename.
To select and rename multiple registers, place a check
mark
beside the target registers to rename.
To select and rename all registers, place a check mark
i
n the Select All checkbox.
You can also press the [Select Register(s)] button and
ent
er a register number in the numeric keypad
window.
4 Press the [Rename] button.
The [Rename] window appears.
5 Press the input field and enter a name (up to 8
characters) using the keyboard.
6 Press [OK].
Note
Note