Sony MLS-X1 User Manual

52
Flexi Pad Control Block
The Flexi Pad control block is used for recalling and
saving snapshots, wipe snapshots, DME wipe snapshots,
and key snapshots, for recalling and creating macros, for
recalling shotboxes, for entering the transition rate, and
for other tasks.
a M
ode selection buttons / operation buttons / bank
selection buttons (assignable buttons)
You can assign mode/bank selection buttons and
op
eration buttons in the Home > Setup > Panel > Module
> Button Assign menu (19104.21).
For details about assigning buttons, see “Assigning
Control Panel Buttons” (page 402).
Mode selection buttons
[UNDO] button / [DEL] button
Function
name
Button name Description
Key KEY Switches to key operation
m
ode.
In key operation mode,
y
ou can carry out the
following operations.
• Saving and recalling key
s
napshots
• Selecting independent
k
ey transition type
• Selecting the key fill
signal or key source
signal in the cross-point
control block
a
b
Wipe WIPE Switches to wipe
snapshot operation mode.
In wipe snapshot
ope
ration mode, you can
save and recall a wipe
snapshot and select a
wipe pattern.
DME Wipe DME WIPE Switches to DME wipe
sn
apshot operation mode.
In DME wipe snapshot
ope
ration mode, you can
save and recall a DME
wipe snapshot and select
a DME wipe pattern.
Snapshot SNAPSHOT Switches to snapshot
ope
ration mode.
In snapshot operation
mo
de, you can save and
recall snapshots, and add
attributes.
Shotbox SHOTBOX Switches to shotbox
ope
ration mode.
In shotbox operation
mo
de, you can recall and
execute shotboxes.
Macro MCRO Switches to macro
ope
ration mode.
In macro operation mode,
pres
s and hold the
[MCRO] button and press
a button (for the target
register) in the memory
recall section to enter edit
mode.
In macro operation mode,
yo
u can save, recall, and
edit macros.
Transition Rate TRANS RATE Switches to transition rate
ope
ration mode.
In transition rate operation
mo
de, you can enter a
transition rate.
Function
name
Button name Description
Undo UNDO After recalling a register,
retu
rns to the state before
the register was recalled.
Delete DEL Press and hold the [DEL]
but
ton and press a
register button in the
memory recall section to
delete the register data.
Function
name
Button name Description

Sony MLS-X1 Specifications

General

Brand	Sony
Model	MLS-X1
Category	Switch
Language	English