Sony MLS-X1 User Manual

25
d) Disabled for SL keys.
e) 1st row is disabled in key/AUX bus delegation mode.
f) Disabled in free assign mode.
g) 1st row and 2nd row are disabled in key bus mode.
h) 1st row and 2nd row are disabled in key/AUX bus delegation mode.
Transition Control Block
The transition control block is used to execute transitions.
It supports common transitions and independent key
tra
nsitions.
For details, see “Chapter 5 Transitions” (page 94).
a Tran
sition execution section
b Di
splay
The display shows the following information.
• Left-side display:
Target switcher bank name (M/E1 to M/E5, P/P)
Main and sub assignment status when in multi program
2 mod
e (MAIN, SUB, MAIN&SUB)
a
da
b
c
c
Transition indicator
Fader lever
Display
AUTO TRANS button
CUT button
Name Description
Fader lever Move this up or down to execute a
tr
ansition.
You can press the [KF] button,
tu
rning it on, to use the fader lever
as a keyframe fader.
Transition indicator Displays the transition progress
us
ing LEDs.
Display Displays the transition rate.
[AUTO TRANS]
but
ton
Executes an auto transition with the
set transition rate and transition
type.
During the transition, the button is
li
t amber.
[CUT] button Executes an immediate transition.

Sony MLS-X1 Specifications

General

Brand	Sony
Model	MLS-X1
Category	Switch
Language	English