Sony MLS-X1 User Manual

196
Detents
In three-dimensional space, points called “detents” are
defined at regular intervals.
You can set the current three-dimensional parameter
val
ues to the closest detent point.
The intervals between detents are defined as follows.
Types of Three-Dimensional
Transforms
There are the following types of DME three-dimensional
transforms.
Move image (Location XYZ)
Moves the image on the X-axis, Y-axis, or Z-axis.
The direction of movement of an image differs depending
on
whether source space or target space is selected.
Image movement in source space
Image movement in target space
Rotate image (Rotation)
In rotation mode, the image rotates around the X-axis,
Y-axis, or Z-axis.
The movement of an image differs depending on whether
source sp
ace or target space is selected.
Image rotation in source space
Operation Detent interval
Move image (Location XYZ) 1.0000
Rotate image (Rotation) (Spin) 0.1250
Move rotation axis (Axis Location) 1.0000
Scale image (Location Size) 0.2500
Change image aspect ratio (Aspect (X)
(Y))
0.2500
Change image aspect ratio (Aspect (Z)) 0.1000
Change viewpoint position (Perspective
(X) (Y)
)
1.0000
Change viewpoint position (Perspective
(Z))
0.0100
Change image skew (Skew) 0.1000
Movement in X-axis
direction
Movement in Y-axis
direction
Movement in Z-axis
direction
Movement in X-axis
direction
Movement in Y-axis
direction
Movement in Z-axis
direction
Rotation around the
Y-axis
Rotation around the
X-axis
Rotation around the
Z-axis

Sony MLS-X1 Specifications

General

Brand	Sony
Model	MLS-X1
Category	Switch
Language	English