•
•
•
Options
Several options are available for the
TAS
475 and
TAS
485 Analog Oscillo-
scopes. This section contains a list of options available.
Options
A1-A5:
International Power Cords
Besides the standard North American, 110
V,
60
Hz
power cord, Tektronix
ships
any of five alternate power cord configurations. See Table 7-1.
Table 7-1: International Power Cords
Option
Power Cord
A1
Universal European - 220
V,
50
Hz
A2
UK-240V,
50 Hz
A3
Australian - 240
V,
50
Hz
A4 North American - 240
V,
60 Hz
AS
Switzerland - 220
V,
50
Hz
warranty-Plus Service Options
The following options add
to
the services available with the standard warran-
ty.
(The standard warranty appears following the title page
in
this manual.)
• Option M2: Tektronix provides five years of warranty/remedial service.
• Option M3: Tektronix provides five years of warranty/remedial service
and four oscilloscope calibrations.
• Option M8: Tektronix provides four calibrations and four performance
verifications, one of each
in
the second through the fifth years
of
service.
Option 3R: Rackmount
With this option, Tektronix ships the oscilloscope with a rackmount kit,
providing all the necessary hardware to adapt the oscilloscope for installa-
tion into a standard 19 inch instrument rack. Customers with instruments
can order a rackmount kit (Tektronix part number
016-1166-00)
for conver-
sion with instructions.
TAS 475 and TAS 485 Service Manual 7-1
To Next Page
Loading...
Need help?
General
