Toyota 2GR-FE User Manual

2GR-FE ENGINE MECHANICAL – ENGINE UNIT
EM–77
EM
37. REMOVE CAMSHAFT BEARING CAP (for Bank 1)
(a) Check that the camshafts are positioned as shown
in the illustration.
(b) Uniformly loosen and remove the 8 bearing cap
bolts in the sequence shown in the illustration.
(c) Uniformly loosen and remove the 12 bearing cap
bolts in the sequence shown in the illustration.
NOTICE:
Uniformly loosen the bolts while keeping the
camshaft level.
(d) Remove the 5 bearing caps.
38. REMOVE CAMSHAFT
(a) Remove the camshaft.
39. REMOVE NO. 2 CAMSHAFT
(a) Remove the No. 2 camshaft.
Front View
Knock Pin
45°
A129700E01
1 3
4
5
6
7
82
A129701E03
5
6
4
110
12
11
3
2
7
9
8
A129702E01

Toyota 2GR-FE Specifications

General

Configuration	V6
Displacement	3.5 L (3, 456 cc)
Compression Ratio	10.8:1
Fuel Type	Gasoline
Bore x Stroke	94 mm x 83 mm
Valvetrain	DOHC, 4 valves per cylinder
Torque	248-263 lb-ft
Oil Capacity	6.4 quarts