2GR-FE ENGINE MECHANICAL – ENGINE UNIT
EM–79
EM
42. REMOVE NO. 3 CHAIN TENSIONER ASSEMBLY
(a) Remove the bolt and No. 3 chain tensioner.
43. REMOVE CAMSHAFT BEARING CAP (for Bank 2)
(a) Check that the camshafts are positioned as shown
in the illustration.
(b) Uniformly loosen and remove the 8 bearing cap
bolts in the sequence shown in the illustration.
(c) Uniformly loosen and remove the 13 bearing cap
bolts in the sequence shown in the illustration.
NOTICE:
Uniformly loosen the bolts while keeping the
camshaft level.
(d) Remove the 5 bearing caps.
44. REMOVE NO. 3 CAMSHAFT
(a) Remove the No. 3 camshaft.
45. REMOVE NO. 4 CAMSHAFT
(a) Remove the No. 4 camshaft.
A109722
Front View
Knock Pin
A129706E01
1
2
3
4
5
6
7
8
A134891E03
5
8
4
9
3
1
2
7
6
11
13
12
10
A129708E01
To Next Page
Loading...
