Toyota 3L User Manual

FUEL SYSTEM - Injection Pump
FU-41
17. CHECK INJECTION VOLUME
a
(a) (2L-T Austria)
Apply 0.68 kg/cm2 (9.6 psi, 66 kPa) of pressure to
the boost compensator.
(b) (2L-T Others)
Apply 0.63 kg/cm2 (9.0 psi, 62 kPa) of pressure to
the boost compensator.
(c)
Measure the injection volume for each pump rpm.
2 L-T
I tern
Austria
Others
Hong Kong,
Singapore,
Malaysia
Others
Adjusting No. of
1 1 measuring
lever angle
position strokes
Plus
23.5
- 33.5"
I 1.200
1
200
Plus
23.5
- 33.5"
200
Plus
23.5
- 33..
2oo
Variation
Injection volume
limit Remarks
cc (cu in.)
cc (CU in.)
13.94
- 14.26 0.4 Basic full-load
(0.85
- 0.87 )
(0.02) injection volume
13.60
- 18.40
1.2 Volume during
(0.83
- 1.12)
(0.07) starting
13.70
- 15.10 0.5
-
(0.84 - 0.92) (0.03)
12.30
- 13.70 0.5
-
(0.75 - 0.84) (0.03)
1 1.60
- 12.80 0.5
-
(0.7 1 - 0.78) (0.03)
13.94
- 14.26 0.4 Basic full-load
(0.85
- 0.87) (0.02) injection volume
13.60
- 18.40 1.2 Volume during
(0.83
- 1.12) (0.07) starting
12.10
- 13.10 0.5
-
(0.74 - 0.80) (0.03)
10.96
- 11.28 0.4 Basic full-load
(0.67
- 0.69) (0.02) injection volume
11.60- 16.40 1.2 Volume during
(0.71
- 1 .OO) (0.07 starting
9.64
- 1 1.04 0.5
-
(0.59 - 0.67) (0.03)
9.39
- 10.69 0.5
-
(0.57 - 0.65 (0.03)
11.56- 11.88 0.4 Basic full-load
(0.71
- 0.72) (0.02) injection volume
1 1.60
- 1 6.40 1.2 Volume during
(0.71
- 1 .OO)
(0.07) starting

Toyota 3L Specifications

General

Displacement	2.8 L (2, 779 cc)
Compression Ratio	22.2:1
Fuel Type	Diesel
Valvetrain	SOHC, 8 valves
Fuel System	Indirect injection
Power Output	91 hp (68 kW) at 4, 000 rpm
Aspiration	Naturally aspirated
Cooling System	Water-cooled
Bore x Stroke	96 mm x 96 mm (3.78 in x 3.78 in)
Cylinder Arrangement	Inline-4