LUBRICATION SYSTEM
-
Replacement of Engine Oil and Oil Filter
LU-5
REPLACEMENT OF ENGINE OIL AND
+
OIL FILTER
CAUTION:
Prolonged and repeated contact with mineral oil will
result in the removal of natural fats from the skin, lead-
ing to dryness, irritation and dermatitis. In addition,
used engine oil contains potentially harmful contami-
nants which may cause skin cancer. Adequate means of
skin protection and washing facilities should
be
provid-
ed.
Care should
be
taken, therefore, when changing engine
oil, to minimize the frequency and length of time your
skin
is
exposed
to
used engine oil. Protective clothing
and gloves, that cannot
be
penetrated by oil, should
be
worn. The skin should
be
thoroughly washed with soap
and water, or use waterless hand cleaner, to remove any
used engine oil. Do not use gasoline, thinners, or
solvents.
In order to preserve the environment, used oil and used
oil filters must
be
disposed of only at designated dis-
posal sites.
DRAIN ENGINE OIL
(a)
Remove the oil filler cap.
(b)
Remove the oil drain plug, and drain the oil into
a
container.
REPLACE OIL FILTER
(a)
Using
SST,
remove the oil filter.
SST
09228- 10001 (w/ By-pass element type)
09228-4001 1 (Full flow type)
(b) Clean and check the oil filter installation surface.
To Next Page
Loading...
Need help?
General
