Toyota 3L User Manual

A-8
SERVICE SPECIFICATIONS - Fuel Svstem
Injection Pump Adjustment
Preparation of
pump tester
Full load
injection
volume
pre-setting
Maximum
speed
pre-setting
Pump inner
pressure
Overflow
volume
Test nozzle type
Test nozzle opening pressure
Injection pipe
Outer diameter
lnner diameter
Length
Minimum bending radius
Fuel temperature
Fuel feeding pressure
Fuel cut solenoid voltage
ltem
Adjusting
lever
position
Maximum
Austria
speed side
2L-T
Maximum
Others
speed side
Hong Kong, Singapore, Maximum
speed side
Others
speed side
ltem
Adjusting
lever
position
Maximum
speed side
2L-T
Maximum
speed side
Others
3 L
Maximum
speed side
DN12SD12
145
- 155 kg/cm2
(2,062
- 2,205 psi, 14,220 - 15,200 kPa)
Hong Kong, Singapore,
Malaysia
6.0 mm 0.236 in.
2.0
mm 0.079 in.
840 mm 33.07 in.
25 mm (0.98 in.) or more
40
- 45'~
0.2 kg/cm2 (2.8 psi, 20 kPa)
6V
Maximum
speed side
strokes
/ NO. of I Injection
-
cc (cu in.)
Pump rpm
I measuring I volume
Pump rpm
Pump rpm
I Inner pressure kg/cm2 (psi, kPa)
-
-
-
-
-
-
-
-
-
-
-
-
-
-
No. of
measuring
strokes
l njection
volume
cc (cu in.)
2,100
Pump rpm
6.6
- 7.2 (94 - 102,647 - 706)
Overflow volume cc/min. (cu in./min.)

Toyota 3L Specifications

General

Displacement	2.8 L (2, 779 cc)
Compression Ratio	22.2:1
Fuel Type	Diesel
Valvetrain	SOHC, 8 valves
Fuel System	Indirect injection
Power Output	91 hp (68 kW) at 4, 000 rpm
Aspiration	Naturally aspirated
Cooling System	Water-cooled
Bore x Stroke	96 mm x 96 mm (3.78 in x 3.78 in)
Cylinder Arrangement	Inline-4