Triumph Daytona 955i User Manual

Funs
rI
o'n
TEST
I
IY S 7 R U !1 f
M
7 P
R ff E L
T
F ED
P 7 1 1
7
9
FUEL SYSTEM/ENGINE MANAGEMENT
Tkewff
24. FUNCTION TEST
25. FUNCTION TEST
This display allows you to decide whether you wish to
test another component.
Either — position the cursor on line 3
`YES'
and press the
Validation key '*' to return to the
`FUNCTION TEST'
selection menu,
or — position the cursor on line 4
`NO'
and press the
Validation key '*' to return to `DIAGNOSTICS' menu
(operation 9).
If the test at operation 22 is unsatisfactory, a DTC will be
displayed on line 3 of this display (except fuel pump
tests).
Press the Help key (?) to access the diagnosis
information associated with that code.
Press the Validation key '*' if you wish to test another
component (operation 24).
NOTE:
•
Any DTC's logged in the system will be
automatically cleared at this point.
To return to the `DIAGNOSTICS' menu, Select `QUIT'
and press the Validation key '*' to return to the
`MAIN
MENU'
(operation 8).
That completes the
FUNCTION TESTS
cycle.
9.44

Triumph Daytona 955i Specifications

General

Displacement	955 cc
Bore x Stroke	79 x 65 mm
Compression Ratio	12.0:1
Fuel System	Multipoint sequential electronic fuel injection
Transmission	6-speed
Rear Brakes	Single 220 mm disc, 2-piston caliper
Front Tire	120/70 ZR17
Rear Tire	190/50 ZR17
Width	720 mm (28.3 in)
Seat Height	815 mm (32.1 in)
Engine Type	Liquid-cooled, inline 3-cylinder
Max Torque	100 Nm (74 lb-ft) @ 8, 200 rpm
Final Drive	Chain
Frame	Aluminum beam
Front Suspension	43 mm inverted telescopic fork, adjustable
Rear Suspension	Monoshock, adjustable
Front Brakes	Twin 320 mm discs, 4-piston calipers
Fuel Capacity	21 litres (5.5 US gallons)