Triumph Daytona 955i User Manual

TUpH
FUEL SYSTEM/ENGINE MANAGEMENT 9
30. SENSOR DATA
SENSOR DATA
PR!1'R
S F N,5 0 R S l/I
VA! R
T E J7'P 7 SCI
31. To access the `ADJUSTMENTS' menu.
CHECK/R
DJUST
CH,FCK
I
►
ADJUST
Q U! T,
I
The display can be scrolled to show:
The status of the various sensors and actuators
To obtain further data information, scroll the appropriate
li
ne to the help key mark (?) and press the Help key.
NOTE:
•
The help information shows the likely range of
readings for a correctly functioning system at
normal operating temperature.
That completes examination of the Checks.
Press the Validation key '*' to return to
`CHECK/ADJUST' (operation 27).
Use the `Up' and `Down' keys to position the cursor
opposite `ADJUST'.
Press the Validation key `*'; `ADJUST' will be displayed.
Start the engine.
9.47

Triumph Daytona 955i Specifications

General

Displacement	955 cc
Bore x Stroke	79 x 65 mm
Compression Ratio	12.0:1
Fuel System	Multipoint sequential electronic fuel injection
Transmission	6-speed
Rear Brakes	Single 220 mm disc, 2-piston caliper
Front Tire	120/70 ZR17
Rear Tire	190/50 ZR17
Width	720 mm (28.3 in)
Seat Height	815 mm (32.1 in)
Engine Type	Liquid-cooled, inline 3-cylinder
Max Torque	100 Nm (74 lb-ft) @ 8, 200 rpm
Final Drive	Chain
Frame	Aluminum beam
Front Suspension	43 mm inverted telescopic fork, adjustable
Rear Suspension	Monoshock, adjustable
Front Brakes	Twin 320 mm discs, 4-piston calipers
Fuel Capacity	21 litres (5.5 US gallons)