4.
Lift the rear of the seat and disengage the front lip
from below the fuel tank.
Refit
1.
Position the front seat to the fuel tank and engage
the front lip.
2.
Align the fixing points to the frame and tighten the
seat fixings to
9 Nm.
3.
Engage the front section of the rear seat/rear
cover under the seat bracket and press down on
the rear to engage in the seat lock.
1.
Seat Lock
2.
Seat Engagement Point
4.
Grasp the seat/cover and ensure that it is
securely retained.
NOTE:
•
An audible `click' can be heard when the
seat/seat cover is correctly engaged in the lock.
i
hUM'1
BODYWORK/FRAME 15
SEAT
Removal
NOTE:
•
The seat lock is situated on the left hand side of
the battery box, in line with the footrest
mounting rail, on the left hand side of the
motorcycle.
•
The seat is removed in two sections. The rear
seat (or rear cover, where fitted) is retained by
the seat lock. The front seat is held in place by
two threaded fixings.
1.
Insert the ignition key into the seat lock and turn
the key anti—clockwise while pressing down on
the rear part of the rear seat/rear cover.
1.
Seat Lock
2.
To detach the seat/rear cover, lift the rear of the
,
seat cover and slide it away from the front seat.
3.
Release the screws securing the front seat to the
frame.
1. Front Seat
2. Seat Retaining Screws
15.7
To Next Page
Loading...
Need help?
General
