Triumph Daytona 955i User Manual

This document is protected by copyright and may not, in whole or part be stored in a retrieval system, or
transmitted in. any form or by any means, copied, photocopied, translated or reduced to any machine-
readable form without prior consent in writing from Triumph Motorcycles Limited.
No liability can be accepted for any inaccuracies or omissions in this publication, although every possible
care has been taken to make it as complete and accurate as possible.
Triumph Motorcycles Limited reserves the right to make changes and alter specifications without prior
notice and without incurring an obligation to make such changes to products manufactured previously.
See
your authorised Triumph Dealer for the latest information on product improvements incorporated after this
publication.
All information contained in this publication
is based on the latest product information available at the
ti
me
of publication. Illustrations in this publication are intended for reference use only and may not depict actual
model component parts.
All rights reserved, © 1998 Triumph Motorcycles Limited

Triumph Daytona 955i Specifications

General

Displacement	955 cc
Bore x Stroke	79 x 65 mm
Compression Ratio	12.0:1
Fuel System	Multipoint sequential electronic fuel injection
Transmission	6-speed
Rear Brakes	Single 220 mm disc, 2-piston caliper
Front Tire	120/70 ZR17
Rear Tire	190/50 ZR17
Width	720 mm (28.3 in)
Seat Height	815 mm (32.1 in)
Engine Type	Liquid-cooled, inline 3-cylinder
Max Torque	100 Nm (74 lb-ft) @ 8, 200 rpm
Final Drive	Chain
Frame	Aluminum beam
Front Suspension	43 mm inverted telescopic fork, adjustable
Rear Suspension	Monoshock, adjustable
Front Brakes	Twin 320 mm discs, 4-piston calipers
Fuel Capacity	21 litres (5.5 US gallons)