Part of the document cover pulls away from the assembly, which allows better
access to the second-side scanning lens assembly.
c) To remove dirt, wipe the mirrored glass, metal strip, both sides of the white-plastic
strip, and the rollers with a soft cloth moistened with water, and then wipe it dry
with a soft cloth.
Caution
Do not press heavily on the mirrored glass as this will result in damage to the film
around the glass surface.
Note
If dirt is difficult to remove, try gently wiping with a soft cloth moistened with a
small amount of neutral detergent.
User Guide14-4
Maintenance
To Next Page
Loading...
Need help?
General