WSD Starting a Scan Job
The Store to WSD service allows you to scan documents set on the machine from a
network computer. It also allows you to save the scanned data to a network computer.
You can scan documents set on the machine by sending a request from a network
computer.
1. Select Store to WSD on the Services Home screen.
2. Select Computer.
3. Load the document on the document glass or in the document feeder, and select
Operate From Computer.
4. The standby screen is displayed on the touch screen.
5. Operate scan from a network computer. To operate scan from a network computer,
use application which supports image loading feature such as Windows Fax and
Scan. The following describes the method using Windows Fax and Scan with Windows
7.
6. After being scanned, the scanned data is forwarded to the specified computer.
WSD Storing Data from a Network Computer
You can forward the data scanned with the command from the machine to a specified
computer on the network.
1. Select Store to WSD on the Services Home window.
2. Load the document on the document glass or in the document feeder, and select
This Device.
3. Computer names and 5 processing methods are displayed in the List of Computers.
Select destination from the list in accordance with the intended use.
4. Press the Start button.
5. The scanned date will be forwarded to the specified destination.
6. Check the forwarded data on the destination computer.
Advanced Settings tab
You can set advanced setting options from the Advanced Settings tab.
1. Select E-mail from the All Services screen.
2. Select the Advanced Settings tab.
3. As needed, select the applicable options:
• Image Options
• Image Enhancement
• Resolution
• Quality/File Size
5-21Xerox
®
D95/D110/D125/D136 Copier/Printer
User Guide
Scan
To Next Page
Loading...
Need help?
General