Xerox D136 User Manual

2-Sided Copying (Making 2-Sided Copies)
Copies of 1-sided and 2-sided documents can be made on one side or both sides.
1. From the Copy screen, in the 2 Sided Copying area, make the applicable selection
from the displayed buttons.
2. If Side 2 is to be rotated (head-to-foot) select the Rotate Side 2 check box.
Copy Output
Copy output can be defined by using the Copy Output button on the Copy screen.
1. From the Copy screen, select the Copy Output button.
2. From the Hole Punch & More screen select the applicable output features from the
Hole Punch & More screen:
• Paper Supply (The Paper Supply screen is displayed.)
• Collation feature
• Separator Tray
• Staple (Available only when Collated is selected)
• Hole Punch (Available only when Collated is selected)
• Output/Offset Stacking
3. Select Save to save the changes.
Image Shift
Image shift features are defined by using the Image Shift button on the Copy tab screen.
1. From the Copy screen, select the Image Shift button.
2. Select the applicable image shift features from the Image Shift screen.
3. When Margin Shift is selected, set the image shift parameters, using the left/right
(or) up/down buttons.
4. Select Original Orientation... and set and save the orientation.
5. You can elect to mirror the Side 1 settings to side 2 by selecting the Mirror Side 1
check box.
6. Select Save to save the changes.
Original Type
The original-type specifications can be defined by using the Original Type button on the
Copy tab screen.
1. From the Copy screen, select the Original Type button.
2. Select the applicable specifications for the original type.
3. Select Save to save the changes.
4-5Xerox
®
D95/D110/D125/D136 Copier/Printer
User Guide
Copy

Xerox D136 Specifications

General

Brand	Xerox
Model	D136
Category	Copier
Language	English