Paper jams at lever 2a and knob 3a
1. Make sure that the machine has stopped printing.
2. Open the right cover on the finisher.
3. Move the lever 2a and turn the knob 3a; remove the jammed paper.
Note
If paper is torn, check inside the machine and remove it.
4. Return the lever 2a to its original position.
5. Close the right cover on the finisher.
Note
A message will display and the machine will not operate if the right cover is open
even slightly.
User Guide22-22
Standard/Booklet Maker Finisher
To Next Page
Loading...
Need help?
General