Specifications
This section provides specifications on the Standard Finisher Plus.
Finisher Module specifications
SpecificationItem
• Top Tray: Collated/Uncollated
• Stacker (middle) Tray: Collated/Uncollated (Offset available)
Tray Type
Top Tray:
• Maximum: SRA3, 13 x19 in., 12.6 x19.2 in., 330 x 488 mm (custom
size)
• Minimum: 100 x 148 mm (SEF), 4 x 6 in. (SEF), A6 (SEF) postcards
Stacker (middle) Tray:
• Maximum: 13 x 19 in. (330 x 488 mm), SRA3
• Minimum: B5, Executive (7.25 x 10.5 in.)
Booklet Tray (optional Booklet Maker Finisher only):
• Maximum: 13 x 18 in., SRA3
• Minimum: A4 (SEF), 8.5 x 11 in. (SEF)
Optional C/Z Folder tray: Supports A4 (SEF) and 8.5 x 11 in. (SEF)
Delivery to a supported third-party, DFA device:
• Maximum: 13 x 19 in., SRA3
• Minimum: B5, Executive (7.25 x 10.5 in.)
Supported Paper Size
Trays:
• Top Tray: 55-350 gsm
• Stacker (middle) Tray: 55-300 gsm
• Booklet Tray (optional Booklet Maker Finisher only):
- Center binding 64-300 gsm
- Center folding 60-105 gsm
• Optional C/Z Folder tray: 64-90 gsm
Delivery to a supported third-party, DFA device: 55-350 gsm
Supported Paper Weight
User Guide24-44
Standard Finisher Plus
To Next Page
Loading...
Need help?
General