Control panel
The control panel consists of the following:
1. Fault indicators: These indicators light when a fault or jam occurs in a particular
area of the SquareFold Trimmer Module.
a. This indicator lights when a jam occurs as the booklet is leaving the exit area
of the finisher.
b. This indicator lights when a jam occurs in the square fold area.
c. This indicator lights when a jam occurs in the trimmer area.
Note
If one of these indicators (1a, 1b, 1c) is lit, the top covers can be opened, and
the jam/fault cleared; otherwise, during normal operation or when the machine
is idle, the top covers cannot be opened.
d. This indicator lights when the Trimmer Waste Container is pulled out or when
it is full.
2. Square Fold options: This area of the control panel contains the following:
Note
The Square Fold options are available from your computer print driver, from your
print server, or from your machine UI (if it is a copier/printer). This is discussed in
more detail in the section entitled Square Fold options.
a. Settings button: Press this button to adjust the Square Fold setting; refer to the
next item.
b. Square Fold options: Select the desired setting; these settings are discussed in
more detail in the section entitled Square Fold options.
Square Fold feature
The Square Fold feature can be selected or accessed from your computer print driver,
the machine UI, or from the print server.
User Guide23-4
SquareFold Trimmer Module
To Next Page
Loading...
Need help?
General