7. Remove any paper jammed paper.
8. Return handles 6a and 6b to their original positions.
9. Open area 6c and remove any jammed paper.
10. Return handle 6c to its original position.
11. Close the binder’s left and right front doors.
12. Follow the instructions displayed on the system UI to restart your print job.
General problems
Power interruption during operation
Note
When power is interrupted to the binder during a print job, the book trimmings may
remain in the paper path. Perform the following steps to clear the paper path.
1. Switch off the system by pressing the power button (which is located on the Print
Engine, Right Side).
2. Open the book stacker tray.
3. Check for the presence of paper cuttings/trimmings the tray.
21-27Xerox
®
D95/D110/D125/D136 Copier/Printer
User Guide
Perfect Binder (D110/D125/D136 with integrated controller)
To Next Page
Loading...
Need help?
General